This role installs `wal-g` from the DCH Yum repository, and creates a
configuration file for it in `/etc/postgresql`. Additionally, it
installs a custom SELinux policy module that allows `wal-g` to run in
the `postgresql_t` domain (i.e. when spawned by the PostgreSQL server).
This role can be used to get a server certificate for PostgreSQL from an
ACME CA using `certbot`. It fetches the initial certificate and copies
it to the PostgreSQL configuration directory. It also sets up a
post-renewal hook script that copies updated certificates and reload
the server.
This rewrite brings a lot of improvements and new functionality to the
*postgresql-server* role. The most noticeable change is the
introduction of the `postgresql_config_dir` variable, which can be used
to specify a different location for the PostgreSQL server configuration
files, separate from the data storage directory. By default, the
variable is set to `/etc/postgresql`. For some situations, it may be
necessary to disable this functionality, which can be accomplished by
setting the value of `postgresql_config_dir` to the same path as
`pgdata_dir`. Note also that the `postgresql-setup` tool, and the
corresponding `postgresql-check-db-dir` script, which are included in
the Fedora/Red Hat distribution of PostgreSQL, do not support having
separate configuration and data directories, so their use has to be
disabled.
Another significant improvement is to how the `postgresql.conf` file
is generated. Any setting can be set now, using the `postgresql_config`
variable; any key in this dictionary will be written to the
configuration file. Note that configuration file syntax requires
single quotes around string values, so these have to be included in the
YAML value.
To support deploying standby servers, the role now supports running a
command to restore from a backup instead of running `initdb`.
Additionally, the `postgresql_standby` variable can be set to `true`
to create the `recovery.signal` file, configuring the server as a
standby.
Sending SIGHUP to the main PID (i.e. conmon) ends up stopping the
service. What we really want is to send the signal to main PID _inside_
the container. We can achieve this by using `podman kill` instead of
`kill`.
Without making the firewall changes permanent, when a server tries to
renew its certificate after rebooting, it will fail as the ACME server
cannot connect to the HTTP port.
Sometimes, the `collectd-version` script crashes or fails to start at
boot. Configuring systemd to automatically restart it will ensure that
it's always running, so machines' versions are consistently inventoried.
The `squid.service` systemd unit now correctly initializes the
configured cache directories, so we do not need to do it explicitly
before starting the server.
The *samba-cert* role configures `lego` and HAProxy to obtain an X.509
certificate via the ACME HTTP-01 challenge. HAProxy is necessary
because LDAP server certificates need to have the apex domain in their
SAN field, and the ACME server may contact *any* domain controller
server with an A record for that name. HAProxy will forward the
challenge request on to the first available host on port 5000, where
`lego` is listening to provide validation.
Issuing certificates this way has a couple of advantages:
1. No need for the wildcard certificate for the *pyrocufflink.blue*
domain any more
2. Renewals are automatic and handled by the server itself rather than
Ansible via scheduled Jenkins job
Item (2) is particularly interesting because it avoids the bi-monthly
issue where replacing the LDAP server certificate and restarting Samba
causes the Jenkins job to fail.
Naturally, for this to work correctly, all LDAP client applications
need to trust the certificates issued by the ACME server, in this case
*DCH Root CA R2*.
HAProxy uses a special configuration block, `resolvers`, to specify
how it should look up names in DNS. This configuration is used for
e.g. dynamically discovering backend servers via DNS A or SRV records.
Since resolvers are global, they need to be specified in the global
configuration file, rather than a per-application drop-in.
We will use this functionality for the ACME HTTP-01 challenge solver
for Samba AD domain controllers.
The current version of *haproxy* packaged in Fedora already enables
configuration via fragments in a drop-in directory, though it uses
a different path by default. I still like separating the global
configuration from the defaults, though, and keeping the main
`haproxy.cfg` file empty.
*dnf-automatic* is an add-on for `dnf` that performs scheduled,
automatic updates. It works pretty much how I would want it to:
triggered by a systemd timer, sends email reports upon completion, and
only reboots for kernel et al. updates.
In its default configuration, `dnf-automatic.timer` fires every day. I
want machines to update weekly, but I want them to update on different
days (so as to avoid issues if all the machines reboot at once). Thus,
the _dnf-automatic_ role uses a systemd unit extension to change the
schedule. The day-of-the-week is chosen pseudo-randomly based on the
host name of the managed system.
Even with `Network=host`, Podman tries to write to
`/etc/containers/network` for some reason. Fortunately, it doesn't
actually need to, so we can trick it into working by mounting an empty
*tmpfs* filesystem there.
Even with `Network=host`, Podman tries to write to
`/etc/containers/network` for some reason. Fortunately, it doesn't
actually need to, so we can trick it into working by mounting an empty
*tmpfs* filesystem there.
The summer 2024 enrollment form is more complicated than the other
forms on the HLC site, as it integrates directly with Invoice Ninja. As
such, it's handled by a different backend, which runs in Kubernetes.
The *promtail* service runs as an unprivileged user by default, which is
fine in most cases (i.e. when scraping only the Journal), but may not
always be sufficient to read logs from other files. Rather than run
Promtail as root in these cases, we can assign it the
CAP_DAC_READ_SEARCH capability, which will allow it to read any file,
but does not grant it any of root's other privileges.
To enable this functionality, the `promtail_dac_read_search` Ansible
variable can be set to `true` for a host or group. This will create a
systemd unit configuration extension that configures the service to have
the CAP_DAC_READ_SEARCH capability in its ambient set.
*unifi1.pyrocufflink.blue* requires a proxy to access Yum repositories
on the Internet, so it has the `proxy` setting configured globally. The
proxy does NOT allow access to internal resources, however. The
internal repository is directly accessible by that machine, so it needs
to be configured thus.
The Squid "cache log" is where it writes general debug and error
messages. It is distinct from the "access log," which is where it
writes the status of every proxy request. We already had the latter
configured to go to syslog by default (so it would be captured in the
journal), but missed the former.
Promtail is the log sending client for Grafana Loki. For traditional
Linux systems, an RPM package is available from upstream, making
installation fairly simple. Configuration is stored in a YAML file, so
again, it's straightforward to configure via Ansible variables. Really,
the only interesting step is adding the _promtail_ user, which is
created by the RPM package, to the _systemd-journal_ group, so that
Promtail can read the systemd journal files.
The *dustinandtabitha.com* website no longer uses *formsubmit* (the time
for RSVP has **long** passed). Removing the configuration so the
file encrypted with Ansible Vault can go away.
A few hosts have `AuthorizedKeysCommand` set in their *sshd(8)*
configuration. This was my first attempt at centrally managing SSH
keys, using a script which fetched a list of keys for each user from an
HTTP server. This worked most of the time, but I didn't take good care
of the HTTP server, so the script would fail frequently. Now that all
hosts trust the SSH user CA, there is no longer any need for this
"feature."
The `TrustedUserCAKeys` setting for *sshd(8)* tells the server to accept
any certificates signed by keys listed in the specified file.
The authenticating username has to match one of the principals listed in
the certificate, of course.
This role is applied to all machines, via the `base.yml` playbook.
Certificates issued by the user CA managed by SSHCA will therefore be
trusted everywhere. This brings us one step closer to eliminating the
dependency on Active Directory/Samba.
Normal users do not need shell access to the file server, and certainly
should not be allowed to e.g. forward ports through it. Using a `Match`
block, we can apply restrictions to users who do not need administrative
functionality. In this case, we restrict everyone who is not a member
of the *Server Admins* group in the PYROCUFFLINK AD domain.
The [pam_ssh_agent_auth][0] PAM module authenticates users using keys in
their SSH agent. Using SSH agent forwarding, it can even authenticate
users with keys on a remote system. By adding it to the PAM stack for
`sudo`, we can configure the latter to authenticate users without
requiring a password. For servers especially, this is significantly
more secure than configuring `sudo` not to require a password, while
still being almost as convenient.
For this to work, users need to enable SSH agent forwarding on their
clients, and their public keys have to be listed in the
`/etc/security/sudo.authorized_keys` file. Additionally, although the
documentation suggests otherwise, the `SSH_AUTH_SOCK` environment
variable has to be added to the `env_keep` list in *sudoers(5)*.
[0]: https://github.com/jbeverly/pam_ssh_agent_auth
Running `squid -z` as *root* leaves behind temporary files in
`/dev/shm`. When *squid.service* starts squid, in the proper SELinux
domain, it is unable to access these files and crashes. To avoid this,
we mount a private *tmpfs* so no existing files are accessible in the
service's namespace.
Instead of hard-coding a single cache directory and a set of refresh
patterns, the *squid* role can now have custom cache rules defined with
the `squid_cache_dir` variable (which now takes a list of `cache_dir`
settings) and the `squid_refresh_pattern` variable (which takes a list
of refresh patterns). If neither of these are defined, the default
configuration is used.
This is a breaking change, since `squid_cache_dir` used to refer to a
directory, and the previous default was to configure one cache path.
There are no extant users of this role, though, so it doesn't really
matter.
The default set of access control lists and access rules for Squid are
fine for allowing hosts on the local network access to the web in
general. For other uses, such as web filtering, etc. more complex rules
may be needed. To that end, the *squid* role now supports some
additional variables. Notably, `squid_acl` contains a map of ACL names
to list entries and `squid_http_access` contains a list of access rules.
If these are set, their corresponding defaults are not included in the
rendered configuration file.
Recent versions of NUT have a *nut.target* unit that collects all of the
NUT-related services. Enabling any of the services individually does
effectively nothing, as it only adds the service as a `Wants` dependency
for *nut.target*, and that unit already has dependencies for all of
them. Thus, in order for the service to start at boot, *nut.target* has
to be enabled instead.
In situations where only *nut-monitor* should be enabled, enabling
*nut.target* is inappropriate, since that enables *nut-driver* and
*nut-server* as well. It's not clear why upstream made this change (it
was part of a [HUGE pull request][0]), but restoring the desired
behavior is easy enough by clearing the dependencies from *nut.target*.
Services that we want to start automatically can still be enabled
individually, and will start as long as *nut.target* is enabled.
[0]: https://github.com/networkupstools/nut/pull/330
The Synapse server can sometimes take a very long time to start.
Increasing the start timeout should keep it from failing to come up when
the machine is under load.
The UniFi controller service can sometimes take a really long time to
start up. This most frequently happens after a full outage, when the VM
hosts are very busy bringing everything up.
The `vm-autostart` script fails with `bad system call` errors when
trying to start libvirt domains. Removing the system call filters works
around this. Ideally, we should figure out exactly which system call is
being rejected and allow it, but that's rather difficult to do and
probably not really worth the effort in this case.
The MinIO service often fails to start from a cold boot. Delaying
starting the service until the network is online, plus increasing the
startup timeout, should help with this. If not, enabling auto restart
will let systemd try to start the service again if it still fails to
come up on time.
`upsmon` is the component of [NUT] that monitors (local or remote) UPS
devices and reacts to changes in their state. Notably, it is
responsible for powering down the system when there is insufficient
power to the system.
I've moved the Dark Chest of Wonders website to run in a container on
Kubernetes. This will keep it from breaking every time the OS is
updated on the web server, when the version of Python in Fedora changes.
Recent(-ish) versions of Fedora have a drop-in configuration directory
for `sshd`. This allows applications, etc. to define certain settings
for the SSH server, without having to manage the entire server
configuration. For Gitea specifically, we only need to set a few
settings for the *gitea* user, leaving the remaining settings alone.
This commit does not include any migration to undo the settings that
were originally set, but that should be as simple as `mv
/etc/ssh/sshd_config.rpmnew /etc/ssh/sshd_config && systemctl reload
sshd`.
The *ssh-host-certs* role, which is now applied as part of the
`base.yml` playbook and therefore applies to all managed nodes, is
responsible for installing the *sshca-cli* package and using it to
request signed SSH host certificates. The *sshca-cli-systemd*
sub-package includes systemd units that automate the process of
requesting and renewing host certificates. These units need to be
enabled and provided the URL of the SSHCA service. Additionally, the
SSH daemon needs to be configured to load the host certificates.
The *dch* repository, hosted on *file0.pyrocufflink.blue* and managed by
the *repohost* Ansible role, is where I plan to host RPM packages for
internal use (e.g. *sshca-cli*, *dch-selinux*, etc.). The *dch-yum*
role configures Yum/dnf to use this repository. Roles that need to
install a package from here will list this role as a dependency.
So it turns out Gitea's RPM package repository feature is less than
stellar. Since each organization/user can only have a single
repository, separating packages by OS would be extremely cumbersome.
Presumably, the feature was designed for projects that only build a
single PRM for each version, but most of my packages need multiple
builds, as they tend to link to system libraries. Further, only the
repository owner can publish to user-scoped repositories, so e.g.
Jenkins cannot publish anything to a repository under my *dustin*
account. This means I would ultimately have to create an Organization
for every OS/version I need to support, and make Jenkins a member of it.
That sounds tedious and annoying, so I decided against using that
feature for internal packages.
Instead, I decided to return to the old ways, publishing packages with
`rsync` and serving them with Apache. It's fairly straightforward to
set this up: just need a directory with the appropriate permissions for
users to upload packages, and configure Apache to serve from it.
One advantage Gitea's feature had over a plain directory is its
automatic management of repository metadata. Publishers only have to
upload the RPMs they want to serve, and Gitea handles generating the
index, database, etc. files necessary to make the packages available to
Yum/dnf. With a plain file host, the publisher would need to use
`createrepo` to generate the repository metadata and upload that as
well. For repositories with multiple packages, the publisher would need
a copy of every RPM file locally in order for them to be included in the
repository metadata. This, too, seems like it would be too much trouble
to be tenable, so I created a simple automatic metadata manager for the
file-based repo host. Using `inotifywatch`, the `repohost-createrepo`
script watches for file modifications in the repository base directory.
Whenever a file is added or changed, the directory containing it is
added to a queue. Every thirty seconds, the queue is processed; for
each unique directory in the queue, repository metadata are generated.
This implementation combines the flexibility of a plain file host,
supporting an effectively unlimited number of repositories with
fully-configurable permissions, and the ease of publishing of a simple
file upload.
The `net cache flush` command does not seem to always work to clear the
identity mapping cache used by winbind. Explicitly moving the file
does, though.
On a new DC, the `idmap.ldb` file does not yet exist the first time
`sysvolsync` runs. This causes a syntax error in the condition that
checks the modification timestamp of the file.
Dustin